Position: Home > News >

china 5454 aluminum sheet supplier and manufacturer

Author:Mingtai aluminum View: Time:2020-05-11

china 5454 aluminum sheet supplier and manufacturer

5454 aluminum sheet is an alloy in the wrought aluminium-magnesium family (5000 or 5xxx series). It is closely related to 5154 aluminum sheet. As an aluminium-magnesium alloy, it combines moderate-to-high strength with excellent weld ability. Like 5154, 5454 aluminium is commonly used in welded structures such as pressure vessels and ships. As a wrought alloy, it can be formed by rolling, extrusion, and forging (although forging is not common), but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility. It is generally not clad.

Principal Design Features AL 5454 is a non-heat treatable alloy of aluminum and magnesium. It is a moderate strength alloy that may be hardened (strengthened) by cold working.
Applications Commonly used in the manufacture of welded structures, pressure vessels, and in marine service.
Machinability The machinability of Al 5454 is fair to poor. It is best to do machining operations with the alloy in the H-34 temper condition. Use of oil lubricants is recommended, except that very light cuts may be done dry.
Forming This alloy does posses good hot working and cold working characteristics. It may be readily cold worked in any of the temper, or annealed, conditions.
Welding All of the commercial welding methods will work satisfactorily with AL 5454. The TIG or MIG process, with AL 5554 or 5356 filler rod, works especially well.
Heat Treatment This alloy is not heat treatable, except for annealing to relieve cold working - see "Annealing".
Forging This alloy may be hot forged, although no temperature range data is available. Consult the alloy supplier.
Hot Working Hot working may be accomplished in the temperature range of 700 to 400 F.
Cold working Cold working is easily accomplished with this alloy by conventional methods. It may be cold worked satisfactorily in either the annealed condition or any of the H-32, H-34, H-111 tempers..
Annealing Annealing, if necessary to relieve cold working stress, may be done at 650 F, allowing sufficient time for thorough heating, followed by air cooling.
Aging Not applicable to this alloy.
Tempering Not applicable.
Hardening Hardens by means of cold working only.
Other Physical Props Electrical conductivity 32% of copper.
Other Mechanical Props Shear strength varies slightly from 23 ksi in the annealed condition to 26 ksi in the H-34 temper.

Mingtai aluminu is a 5454 aluminum plate manufacturers and supplier, delivering to the whole of the world. we are ISP9001:2008 arredited and suppliers 5454 aluminum sheets to internationally approved quanlity standard for applications. 5454 aluminum sheet has excellent quanltiy to satify customer's requirments.


Henan Mingtai Aluminum Inductrial Co.,Ltd

Marketing hotline: +86-15237181905

Email: sales01@mingtai-al.com

Company address: No.6, Changchun Road, High-tech

Industrial Development Zone, Zhengzhou City